Lazertran Techniques

Lazertran Silk can be used to put photocopied images onto glass tissue

Have your image copied in reverse onto a sheet of Lazertran Silk transfer paper
Lay the fine glass tissue over the image and using a hot iron iron the image into the tissue
Do not pull at the transfer paper to make sure it is stuck but put into a bath of water. After a few minutes the backing sheet of the Lazertran Silk will fall off leaving the image on the glass tissue
Lift from the water and dry with a cool iron from the back. Do not touch the toners with the iron
When dry lay a sheet of baking parchment over the image and iron the toners through the parchment, into the glass tissue. Allow to cool and peel off the parchment
This glass decal can now be resined into or onto molds or fiberglass

Print the image in reverse or mirror on a sheet of Lazertran Silk paper using a laser printer
Using a mold to limit the spread of the resin, pour the mixture onto the printed image on the Lazertran Silk
Allow to set then immerse in water until the backing sheet soak off leaving the toners in the resin
When dry another layer of resin can be poured over the image encapsulating the image in the resin